Double T Beam HEA 160 1000 mm - Steel Profile as T Beam for Construction Support Frame Construction Carport - Hot Rolled Untreated

The HEA steel beam double T from Stahl-Shop24 is a hot-rolled double T profile made of mild steel for load-bearing constructions in private and commercial construction. The characteristic H shape with wide flanges ensures reliable load absorption and is often used in construction as a subtractor camber or interception. The different variants allow a selection to match the static requirements and the planned installation situation in new building conversion or stock. The profile is manufactured using a hot-rolled process. This creates the typical rolling skin with possible scale layer as well as surface rust which is common for material and untreated steel. The steel support is delivered raw and without coating and can be further processed depending on the project. Drilling, welding, screwing and subsequent coating by primer painting or galvanising are possible. The end surfaces are neatly cut according to the selected length. The HEA double T profile is characterised by wide flanges and a balanced profile geometry, making it suitable for a variety of load-bearing constructions. In everyday construction, a double T carrier is often used for door openings, wall openings and ceiling interceptions. The profile is also used in carport constructions, hall frames, workshop projects agricultural buildings or smaller steel frame constructions. As a support, the steel beam can hold loads from masonry ceilings or roof structures and dissipate them into side supports. Compared to other profile types, the HEA design is designed for an efficient combination of load capacity and material use and represents a proven solution in steel construction. The T carrier is suitable for both experienced individuals and metal construction companies construction companies and maintenance departments. By selecting different dimensions and lengths, the profile can be adapted to the respective installation situation. Supplied as a single steel profile in the selected variant. Due to the untreated surface, the material should be protected accordingly when used outdoors. For load-bearing applications, a project-specific static calculation is recommended, especially for wall breakthroughs or ceiling-bearing constructions. Question 1: Is the steel carrier rust-proof. Answer: The profile is made of untreated mild steel and is delivered raw. A slight scale layer or rust is typical of the material and does not represent a defect. If necessary, the profile can be primed or galvanised. Question 2: the HEA steel beam can be welded or drilled Answer: yes. The hot-rolled steel profile can be welded, drilled or screwed using standard methods. Professional processing is required. Question 3: What is a double T profile used for? Answer: Typical applications include beams lintels ceiling interceptions frame constructions carport construction hall construction and other load-bearing steel structures indoors and outdoors Question 4: Is the carrier ready to install immediately. Answer: The profile is delivered cut to the selected length and can be further processed directly. A surface treatment is recommended depending on the place of use. Question 5: Static calculation must be done Answer: For load-bearing or safety-related constructions, the dimensioning should be checked by a qualified professional and calculated statically

• Solid steel beam, double T in HEA design made of hot-rolled mild steel, suitable for supporting constructions indoors and outdoors. The double T profile is characterised by wide flanges and high stability and is often used as a substrate camber or interception. Ideal for breakthroughs in masonry ceiling supports, hall construction, carport constructions, workshop projects and agricultural buildings. The profile is raw untreated. with typical roll, with typical rolling Skin made
• HEA double T beam with precise cutting to the selected length from 500 mm to 2000 mm depending on the variant. The end surfaces are cleanly cut and allow direct further processing by welding, drilling or screwing. The steel profile is suitable for statically relevant applications in private house construction, commercial metal construction as well as for renovation and conversion work. Flight rust or scale layer are material type. and there are no quality and there smangel dar
• The double T profile offers a high load capacity with comparatively efficient material use and is used as a classic steel beam in construction. The characteristic H shape ensures good load absorption and distribution in frame constructions. Supports and cross members. Suitable for concrete supports. Steel constructions as well as as a supporting element in new construction or existing building. The design corresponds to the typical HEA geometry for versatile applications
• The T-beam is manufactured using a hot-rolled process and has an untreated surface without coating. This means that the steel profile can be individually processed, primed or galvanised. The robust construction makes the steel beam suitable for durable constructions in private construction project craft business or industrial environment. Delivered as a single profile in the selected dimensions and length
• Steel profiles such as this HEA steel beam double T are often used for door openings, wall openings, ceiling reinforcements, carport construction, workshop constructions and hall frames. The different variants allow a demand-oriented selection for static requirements in residential buildings, commercial construction or agricultural sectors. The design is intended for load-bearing applications, a static calculation should be carried out project-specific